Independent equipment service for multi-axis laser machines used on aerospace and turbine components: five-axis and rotary motion, processing heads, accessible source interfaces, assist gas, cooling, extraction, controls and the cell safety chain. We service the machine. The part, the programme and the certificate stay with you.
These machines combine a laser source with five-axis or rotary-plus-tilt motion, a processing head, assist gas, coolant, extraction and a controller that coordinates all of it. On turbine hardware the tolerance stack is tight and the parts are expensive, so a machine that is merely drifting is treated as down. The question a service call has to answer first is which layer moved: motion and feedback, head and optics, gas delivery, thermal, or control.
This page covers drilling, cutting and multi-axis processing equipment. Deposition, cladding, powder and wire feed and robotic welding cells are a different machine class and are covered on the welding, cladding and DED cell page. Keeping the two apart is deliberate: the feed path and the five-axis table fail in different ways and need different conversations.
PhaseX can evaluate five-axis and rotary motion with drives, encoders and reference hardware, machine-side head interfaces and accessible external optics, assist-gas delivery and regulation, coolant and thermal circuits, extraction, machine controls, I/O, HMI, interlocks and the cell safety chain, plus accessible source power and communication interfaces where the architecture and authorization permit. We do not open sealed optical modules, we do not write, change or recover part programmes or process parameters, we do not perform qualification, revalidation, first article inspection or non-destructive testing, and we do not release a certified component. Export-controlled, classified and customer-proprietary data stays on your side of the fence and is not requested.
Multi-axis laser processing system; confirm axis configuration, installed source, head and control generation.
Published LASERDYNE platform; confirm configuration and installed options from the nameplate.
Legacy families still in service. We can evaluate accessible layers; this is not a statement that parts or OEM support remain available.
Multi-axis drilling and shaping platforms; confirm model, generation and installed laser package.
Published Winbro drilling platform; confirm axis and head configuration before scope.
Further published Winbro families; confirm nameplate and installed configuration.
Water-jet-guided laser systems; confirm water and optics arrangement and the installed configuration.
Multi-axis cells used for cutting and welding of three-dimensional parts; confirm generation and installed options.
Send machine, source, head and controller nameplates. An unlisted builder is not an automatic refusal.
These are manufacturer-published platform names, used to identify customer equipment. They are product-identity evidence only. Naming a platform here does not state that PhaseX has already serviced it, does not imply an OEM relationship, and does not imply any military or government authorization.
A symptom routes the evaluation; it does not diagnose a failed part.
Send machine nameplates, exact alarm text and authorised screen images. Do not send part programmes, process parameters, engine or component drawings, inspection records, or anything export-controlled, classified or customer-proprietary. We do not need them and we will not store them.
Process parameters, part programmes, qualification and revalidation, first article inspection, non-destructive testing, certified-component release and airworthiness determinations remain with the owner, the certificate holder and the relevant authority. A PhaseX report documents machine condition and machine work. It is not a part acceptance and it carries no airworthiness meaning.
PhaseX is not a repair station, holds no aviation approval, and claims no military or government authorization. Where your programme requires an approved source for a given activity, that activity is outside our scope and we say so before travel.
No. We report machine condition and the work performed on the machine. Qualification, first article inspection, non-destructive testing, certified-component release and airworthiness stay with the owner, the certificate holder and the relevant authority.
No. Part programmes and process parameters are yours. We do not ask for them, we do not write them and we do not change them. We work on the machine that executes them.
This page covers multi-axis drilling, cutting and processing machines. The other page covers deposition and cladding cells with powder or wire feed and robotic welding. Different hardware, different failure behaviour, different service conversation.
No. PhaseX is an independent service company, is not a repair station, holds no aviation approval and claims no military or government authorization. Where your programme requires an approved source, that work is outside our scope.
Five fields to start, and no obligation either way. We reply with an assessment and, where site or bench work makes sense, a written scope and a fixed fee for your approval.